Troubleshooting a Water Heater Emergency: How to Do If It Stops Working
Troubleshooting a Water Heater Emergency: How to Do If It Stops Working
Blog Article
We've found this article on What Would Cause My Electric Water Heater to Stop Working? listed below on the internet and accepted it made good sense to share it with you here.
Several contemporary houses utilize an electric water heater for their heating system, as a result of its ease and also simplicity of use. Nevertheless, just like any other electric devices, troubles might occur with its usage, all of a sudden. It can be actually irritating to get up to a cold shower as opposed to a warm one or having your bath with water that isn't warm sufficient or even too warm. Whatever the situation may be, hot water heater issues can be quite aggravating. Luckily, we've made a checklist of feasible options to your water heater concerns. There are a number of factors that might cause most of these issues, it could be a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the issue is, getting it repaired should not pose too much of a problem if you follow these steps:
Call A Specialist:
If after replacing all damaged parts and also resetting your temperature, the hot water heater still isn't working, you might need to call an expert plumber for an expert point of view. The issue with your heating system could be that the hot and cold faucets have been changed or it might be undersized for the amount of hot water required in your home. Whatever the situation might be, a professional plumber would certainly help solve the problem.
Inspect Your Power Supply:
As standard as this might seem, it is extremely needed. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power problem. Examine if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, just transform it on and off once more. Change any type of broken or damaged fuse. Examine the appliance with power after these modifications to see if it's now functioning.
Check Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't warm sufficient, you might require to examine the temperature level settings on your top thermostat. Ensure the breaker is switched off before doing anything. Open the accessibility panel as well as press the red switch for temperature reset over the thermostat. This should help heat the water. Turn the circuit breaker back on and also inspect if the issue has actually been settled.
Inspect the Burner in the Water Heater:
If it's not a power problem, after that attempt looking into your burner if it is still working. Evaluate each of your heating elements to be sure the issue isn't with any one of them. If any one of them is faulty, change that component and then examine whether the hot water is back on.
Final thought
Water heater issues are not always major. A number of them are because of minor issues like a blown fuse or worn-out burner. Changing the damaged components must work. However, if you are still incapable to solve the problem, give a call to your local plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I was made aware of that write-up on No Hot Water — Water Heater Repair from an acquaintance on our other web address. Are you aware of anybody else who is truly interested in the subject? Take a moment to share it. Thanks a lot for your time invested reading it.
One-stop solution, phone now! Report this page